Durable 10 inch Powered Marine & Boat Subwoofer
Engineered for harsh marine conditions
With a marinized circuit board, stainless steel hardware and all the right waterproofing, the MPS1000 was, like all JBL® marine audio products, built to survive salt water, corrosion and other risks – and show you a great time on the open seas.
Tuning options for systems of any size
The JBL® MPS1000 has a built-in 12dB electronic crossover that provides adjustment from 70Hz - 170Hz.
Optimize performance in any location
A variable bass-boost circuit provides additonal control right in the sweet spote of 40Hz. So if you are looking for more or less punch simply dial it in.
Easy installation in tight spaces
Owning a boat takes commitment and work. Installing the JBL® MPS1000? Not so much. It’s also pretty compact at 9 by 10-1/4 by 2-3/16 inches with a low profile heat sink. You can put it in the tightest of spots.
Big, dynamic power
The JBL® MPS1000 has output of 60 watts RMS and peak power handling of 160 watts. You can fill the fresh, open air with great sound.
Mounting Cutout Diameter (in)
Mounting Depth (in)
Mounting Cutout Diameter (mm)
Mounting Depth (mm)
- (1) MPS 1000 10-Inch 250-Watt Powered Marine Subwoofer.
- (1) Mounting template
- (1) Owner's Manual
Manuals & Downloads
The latest owner's manuals, quick start guides, and documents.
1 Year Warranty
Note: the Warranty Card provided with your JBL product contains the full terms and conditions of your warranty.
Unless a different warranty period is stated in the Warranty Card provided with your JBL product, JBL warrants for a period of 1 year (5 years for any non-powered speakers) from the date of retail purchase by the original end-use purchaser, that this product, when delivered to you in new condition, in original packaging, from a JBL authorized reseller and used in normal conditions, is free from any defects in manufacturing, materials and workmanship. Refer to the Warranty Card provided with your JBL product for specific details including what is not covered along with other terms and conditions.
Call us: 1.800.336.4525
- Sales and pre-sale assistance
- Technical help
- Parts and accessories
MPS1000 is rated
Rated 5 out of
Great sound quality
I added this subwoofer to my already existing Jbl boat stereo system. Wow what a difference it makes. I tuned the system to where My 6.5 jbl speakers are producing the highs and mids, and the sub is handleing all of the lows effortlessly. Now I have clean,clear, and loud music on the water.
Easy to install and I like the fact that I didn't have to go through the the trouble and exspens of a separate subwoofer amplifier.
I would recommend to a freind to by this or two. For me one seems to be working fine.
Date published: 2016-05-26
Rated 5 out of
Love this sub. its lightweight, powerful and sounds amazing. would definitely recommend getting this amp.
Date published: 2014-06-20
Rated 4 out of
This is a very good product.
This is a very good product. This product has great features.
Date published: 2012-10-18
What are the Green/Gray output lines for?
The gray and green terminals are RCA outputs which can be used to chain multiple subs for a system.
Date published: 2017-05-29
Does this need a box to mount in and if yes what size should the box be? Sq ft-volume.
MPS100 does not need a box. As long as the mounting location can accommodate the speaker's measurements, you are fine. Please refer to the spec below for additional information.
10" (250mm) 250-Watt Powered
•Integrated amplifier and enclosure;
mounts like a car subwoofer
•Built-in 12dB electronic crossover
allows adjustment between
70Hz and 170Hz
•Built-in Bass EQ provides 40Hz
adjustment between –6dB and +3dB
•10" (250mm) high-excursion woofer
with polypropylene cone
•Controls located on the front panel,
under a watertight protective cover
•250-Watt Class D amplification
•Mounting depth: 7-15/16" (202mm)
•Cutout diameter: 10-3/16" (259mm)
Date published: 2017-09-22
I just bought one of these MSP1000 and I'm having trouble hooking it up to my Infinity PVR250 marine radio. How can I get some technical help with this? I've looked on line trying u tube and can find nothing on this. Please help.
The MPS1000 can be hooked up using either RCA or the speaker wires. If your PVR250 has RCA outputs, just connect the red and white RCA at the sub. If it doesn't, just hook up the speaker level inputs. Connect white-white/black and grey-grey/black to the same color wires, and it will work that way.
If this doesn't help, please submit a case at www.jbl.com/contactus and the Customer Service team will be happy to further assist you.
Date published: 2017-01-27
Is the Mps 1000 need an amp or is it self powered
The MPS1000 is a self powered speaker that has its own amplifier.
Date published: 2016-12-01
I don't want to run the sub all the time due to battery drain on my small boat. Will I still have sound from the speakers (L & R Out) if I don't power on the sub but want the radio on?
Unfortunately, the MPS1000 does not support standby passthrough. With that said, if you would like to use the speakers connected to the MPS1000 the unit should be switched ON for you to be able to use the speakers.
Date published: 2016-05-28
No Online Dealer's available for this product
Find a Store Near You
The Store Locator is designed to help you find the closest store near you.
Click a store in the list or on the map to view details.