JBL Stage A190


Home Audio Loudspeaker System

$449.95449.95 each

Free Ground Shipping on this Item

Product Actions
Add to cart options

In stock and ready to ship

Order within 29 hrs 31 mins with Free Ground Shipping and receive by Wed, Aug 28
Your zip code 20149 edit | Want it faster?
Front row seats to the concert, now available.

The JBL Stage is an advanced, home-stereo/home-theater speaker system that offers you the thrill of a live-concert experience, all in your living room. Featuring 1” aluminum dome tweeters with high-definition waveguide sound design and 8” woofers that register deep, signature JBL bass, the JBL Stage captures every note of the audio spectrum from high to low – and combines them into pure listening pleasure. Available in pantone black or two-tone wood, JBL Stage is a stylish addition to any theater system. Whether it’s for movies or music, the sound of your home will never be the same.


General Specifications

2.5 way, dual 8", 1" aluminum tweeter floor standing loudspeaker Yes
2 x 8" (203mm) Polycellulose Low-Frequency Woofer Yes
New High Definition Imaging (HDI) Waveguide Yes
1” (25mm) Aluminum Dome Tweeter Yes
Recommended Amplifier Power 20 – 225W
Frequency Response 36Hz – 40kHz
Sensitivity 91dB @ 1M, 2.83V
Nominal Impedance 6 Ohms
Crossover Frequencies 1.4kHz, 2.0kHz
Enclosure Type Bass-Reflex via Rear-Firing Tuned Port
Dimensions (W x D x H) 260 x 370 x 1070mm
Weight 49.74 lbs (22.56kg)
Click here for a complete list of all specs for this product

Spec Sheet (EN)

English 728 KB
  • 1 x JBL Stage A190 Floor Standing Loudspeaker
  • 1 x Owner’s Manual
  • 1 x Warranty Card
  • 4 x Outriggers
  • 8 x Screws for Outriggers
  • 4 x Floor Spikes
  • 4 x Rubber Feet

Manuals & Downloads

The latest owner's manuals, quick start guides, and documents.

Search Result For ""

Where do these speakers fall in line?. Are they above the studio 2 series. Do they fill the gap between the 5 series and 2 series?

Asked by: Nickflicks
The STAGE series are considered to be a step below the STUDIO series because of the less expensive retail price lack of a midrange driver, as compared to the STUDIO 290. Although, when looking at the specs, one can argue that some of the specs on the STAGE looks better than the STUDIO.
Answered by: Steven M
Date published: 2018-12-01

I just bought A190 L+R, A135c Center, A170 Rear and A120p Sub .I have a Onkyo amp, when I ran my audyssey auto setup it configured this way. A190 full band A135 80hz A170 full band and sub 80hz. Is this proper set up, anything I should change. Thx

Asked by: Duke77
You could try setting your A190 to 50hz, your A170 to 60hz, A135 should be fine at 80hz. Sub would handle below 50hz. Auto eq's often set towers speakers to full band which is usually fine for music but if you're watching movies you'd want the sub producing the lower frequencies since it's built for the purpose. A properly blended sub works great in stereo mode with music too. Your Towers will thank you as well as now they aren't being so taxed trying to produce the lower frequencies. It's all about the seamless blend amongst your speakers. You could also move up a tad and try a 60hz/70hz/90hz, sub handles below 60hz. You would might gain a little clarity but I don't know how the bass response would be in your home. Experimenting is where the fun it with set ups! Good luck!
Answered by: MikeMc79
Date published: 2019-04-14

I have a the AVR 1710s. I’m using these as my left and right. What setting should the crossover be?

Asked by: HDTestryder
The crossover setting should be adjusted in respect to compliment your other speakers. 100Hz or 120Hz is a great starting point, but we recommend that you adjust it according to your preference.
Answered by: Mario at Customer Service
Date published: 2018-11-29

These speakers look cheap compared to the SE80 I have, I'm planning to get me a pair of studio 290. what are your thoughts?

Asked by: coco loco
  • y_2019, m_8, d_23, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_stagea190, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_jbl