Description
Shielded Indoor/Outdoor Monitor Speaker
The Control® 25AV utilizes a deep cabinet, high power components and complex network to achieve extremely smooth high fidelity performance from a compact 2-way loudspeaker. Premium performance capability and even coverage ensures excellent sound quality throughout the listening area. Magnetic shielding allows use of the speaker in close proximity to video monitors. The top-quality transformer, with reduced saturation, allows use on either 70 volt or 100 volt distributed speaker lines, with similar performance fidelity. In the bypass position, the high 8 impedance allows use of more speakers on a loudspeaker line. The unique, global patent pending InvisiBall ® mounting method is simple to install, aims easily, and provides a high degree of theft deterrence. The cabinet accepts a variety of paints to match any décor. Weather resistance is maximized by a stainless steel grille, which is paintable. Coating the woofer in polypropylene and terminating its circumference in JBL’s WeatherEdgeTM, a seamless, butyl rubber extension of the woofer surround, protects critical transducer elements. The polycarbonate tweeter diaphragm is reinforced with a thin film of titanium for added rigidity and endurance. Nickel/zinc rust-resistant terminals ensure a secure input connection. JBL’s exclusive SonicGuard overload protection is virtually inaudible to the listener, ensuring reliability while providing full fidelity sound. The Control 25AV can be used full range or low frequencies can be further augmented with the addition of one of the Control Contractor subwoofer models.
General Specifications
- Frequency Range (-10 dB)
- 70 Hz - 23 kHz
- Midrange (±1.5 dB, typical)
- 130 Hz - 14 kHz
- 100 Hr Power Capacity
- 200 Watts Continuous Program Power ; 100 Watts Continuous Pink Noise
- Nominal Coverage
- 100° x 100°
- Nominal Sensitivity
- 87 dB SPL, 1W @ 1 m (3.3ft)
- Maximum SPL @ 1m
- 113 dB continuous peak pink noise ; 107 dB continuous average pink noise ; 103 dB continuous average music or speech
- Directivity Factor (Q)
- 4.9, averaged 500 Hz to 4 kHz
- Directivity Index (DI)
- 6.9 dB, averaged 500 Hz to 4 kHz
- Nominal Impedance
- 8 ohms
- Minimum Impedance
- 6.7 ohms at 230 Hz
- Crossover Type
- Second Order Lowpass, Second Order Highpass, Complex Optimization for Maximally Flat Response
- Transformer Taps
- 170V = 60W, 30W, 15W, 7.5W taps (Taps #4,#3, #2 & #1) ; 100V = 60W, 30W, 15W taps (Taps #3, #2, & #1) ; Thru position = 8 ohms nominal
- Low Frequency Transducer
- 130 mm (5.25 in) polypropylene-coated paper with WeatherEdge surround, 25 mm (1 in) voicecoil on kapton former
- High Frequency Transducer
- 20 mm (.75 in) titanium coated PEI
- Included Accessories
- 1 Pr MTC-PC input panel cover, InvisiBall mounting base, 6 mm x 100 mm InvisiBall hex wrench
- Optional Accessories
- MTC-25V for vertical columnar mounting of up to 3 speakers ; MTC-25/23H for horizontal splaying of 2 speakers. Three brackets array either 3 or 6 speakers in a hanging array module for 360° horizontal coverage. ; MTC-28/25CM to install speaker down from the ceiling. Check JBL Control Contractor Bracket and Adapter Handbook. ; MTC-xxWMG WeatherMax™ Stainless Steel Grille with a three-layer backing, including vapor barrier to break up driving precipitation. Available in black or white (-WH).
Dimensions
- Dimensions (H x W x D)
- 236 x 186 x 159 mm (9.3 x 7.4 x 6.3 in)
- Net Weight (ea)
- 4.0 kg (9 lbs)
- Shipping Weight (pair)
- 9.0 kg (20 lbs) per pair
Design
- Enclosure Material
- High Impact polystyrene
- Grille
- Painted stainless steel, black or white to match cabinet, paintable
- Overload Protection
- Full-range power limiting to protect network and transducers. Internal fuse to protect during exceptional overload condition
- Environmental
- Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IEC 529 IP-X4 splashproof rating
- Termination
- Screw-down terminal strip, zinc-plated copper base, nickel plated metal screws/washers, accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10), plus bare wire. (up to 12 AWG)
- Safety Agency Rating
- Transformer is listed per UL1876
- Rotation
- Against wall on InvisiBall Base
What's in The Box?
- 1 x Control 25AV
- 1 x InvisiBall™ wall-mounting system
- 1 x 6 mm x 100 mm hex key