JBL® Everest™ 300


On-ear Wireless Headphones

Product Actions

This item is currently not available.

Legendary Sound, No Strings Attached

JBL® Everest™ 300 is legendary sound set free. Bluetooth 4.1 enables wireless connectivity, JBL Pro Audio Sound delivers a dynamic listening experience, and sculpted ear cushions allow for unprecedented fit, and comfort on your ears. With a rechargeable battery offering 20 hours of performance and ShareMe 2.0 to wirelessly share music, videos and games, now you can dance alone or with a partner, free from limits. A built-in microphone also allows for easy call access.

Item# V300BTCBU

Device Compatibility

Bluetooth Yes

General Specifications

Sensitivity 100dB/1kHz, 1mW
Frequency Response 10-22kHz
Driver 40mm

Audio Specifications

Sensitivity 100dB/1kHz, 1mW
Frequency Response 10-22kHz

Speaker Specifications

Driver 40mm


Weight (g) 245
  • 1 pair of JBL® Everest™ 300 headphones
  • 1 Micro USB charging cable
  • 1 Audio cable with 3.5mm jack
  • 1 Quick Start Guide
  • 1 Warranty and safety note
  • Aha Radio Information Sheet

Search Result For ""

1 Year

Note: the Warranty Card provided with your JBL product contains the full terms and conditions of your warranty.

Unless a different warranty period is stated in the Warranty Card provided with your JBL product, JBL warrants for a period of 1 year (5 years for any non-powered speakers) from the date of retail purchase by the original end-use purchaser, that this product, when delivered to you in new condition, in original packaging, from a JBL authorized reseller and used in normal conditions, is free from any defects in manufacturing, materials and workmanship. Refer to the Warranty Card provided with your JBL product for specific details including what is not covered along with other terms and conditions.

Call us: 1.800.336.4525

  • Sales and pre-sale assistance
  • Technical help
  • Parts and accessories
JBL® Everest™ 300 is rated 3.7 out of 5 by 86.
Rated 5 out of 5 by from Really good headphones I am very pleased with this product. I highly recommend!!!
Date published: 2018-03-24
Rated 5 out of 5 by from Great product and great product support dept. The headphones are comfortable and they were not as expensive as others at the time i purchased these. My puppy ate the cables that came with them and I wasted my time trying to order them on many web sites that told me it was what i needed but when they came they were not. Found JBL.com and they were very helpful and the correct cables i need will be delivered asap. They were awesome.
Date published: 2018-03-17
Rated 5 out of 5 by from Great product Love ❤️ it.........................................:.,
Date published: 2018-03-14
Rated 5 out of 5 by from Comfortable and good sound quality After ordering, I was worried that on-year would be uncomfortable. But it was an unnecessary worry. The fit of this headphone was very comfortable. Easy pairing and well tuned sound were the best for outdoor use. This headphone gave me confidence in JBL's products.
Date published: 2018-01-08
Rated 5 out of 5 by from It’s grest nice fit good battery doesn’t get loose when i workout or hoop
Date published: 2018-01-06
  • y_2018, m_9, d_20, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_86
  • loc_en_US, sid_everest300, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_jbl

My headphones are SUPER tight on my head to the point that my ears feel sore and bruised and I have to take breaks using them to avoid headaches. Anyone else having this issue?

Asked by: SquirrelPLZ
Yes, I have the same issue.  Is there a way to make them not so tight?
Answered by: LynnJ
Date published: 2018-05-07

I have a pair of everest 300 headphones and the audio quality on anything coming from my computer on windows 10 is terrible. through bluetooth 4 dongle.It sounds distorted, low bit rate, delayed and time stretched. There is no software update on this site

Asked by: PaulJones
After updating the firmware it partially resolved the issue. However, the problem is with Bluetooth and the microphone. If I enable the headphones as the playback device in the windows audio settings and remove the microphone from the recording devices in windows, then when I initially pair the device on start up the audio in all areas of windows works perfectly.. However if I enable the microphone as a recording option at any point, then the audio quality drops to sub par. Something like 64kbps mp3 or worse. due to time stretching, crackling and noise artefacts. Clearly Bluetooth cannot handle bi directional streaming of audio from and to the device in high quality, so if the microphone is on or used it reduces any possibility of good audio quality.This means Bluetooth on windows simply can not handle the devices intention.I haven't tried this on Android . Maybe someone else outside the company an confirm if this works properly on Android or in windows 10. This is not the entire problem solved though, if for any reason the device turns itself off due to inactivity, then switching the device back on to pair it with windows causes the audio to go into low quality. This shouldn't happen as the device is already paired, the microphone is disabled and the headphones are being used in a manner that is correct.Why this happens is beyond my understanding and is very annoying, this means I have to restart the computer to get good quality sound if I want to use the headphones to listen to something. Clearly this is a major problem. Yet still this is not the entire problems. If there is another playback device enabled, for example in my case a focusrite USB device was enabled as an alternative playback device. I have to disable and remove that as a playback option from the windows playback list or else when I start up, even if the headphones are set as default playback device, the audio will be sub par.. I can however use the focusite as the recording device and use my choice of microphone into the USB pre amp device, bypassing the JBL mic on the headset. SO all in all this is very unusual TOO LONG DIDN'T READ VERSION: 1; JBL as single playback device, no other device enabled in playback list, 2: JBL disabled in recording devices, any other device can be used as the recording input device. And the audio is fine Any other variation from this and the device works sub par. 2: Switching the device off when windows is on and then switching it back on creates sub par audio once again. JBL you need to look into this as it's not good for the product. In fact I might be returning it as I can't be wasting time rebooting windows every ten minutes when the device turns off. And having no other audio output options for my audio programs on windows is yet another reason I am bothered by the product.
Answered by: PaulJones
Date published: 2017-12-02

Manual not very descriptive. What is the "s" button do?

Asked by: blue60rocker
the shareme functions allows to connect another bluetooth speaker to that headphone so you can "share" your audio
Answered by: WerIchNee
Date published: 2017-12-02

My Everest 300 sounds considerably softer in volume compared to the stock earphones i got with my phone (only when connected to apple devicesboth wired and bluetooth connections). Is there a problem with my earphones?

Asked by: samus1218
Also... Impedance for lighter headphones use to be lower so it may seem louder (or better)
Answered by: Jvictor
Date published: 2017-12-02

I would like to download the firmware update for the Everest 300 (not Elite). Multiple posts state that one is available which eliminates the delay issue, but the link seems to be gone.

Asked by: brwone
The cost of these headphones is why it is inexcusable for you to not have firmware readily available for such a simple fix... Either step up and perform within the price range you’ve placed yourself or step down. No time for nonexistent support, any other company would have catered to my needs and certainly wouldn’t have lag issues with BT v4.0+.
Answered by: L2Support
Date published: 2018-04-24

Where is the firmware to download?

Asked by: tarozz
Any update yet? I just got these and have heard that a firmware update will fix the terrible audio lag on Bluetooth otherwise they're absolute junk to me and around 50% of the people who bought them because video is going mostly to Bluetooth with smart TVs these days.
Answered by: Tem_h
Date published: 2018-01-21

Is this different from the Everest ELITE 300?

Asked by: samirai9
Hi. Yes, the Elite 300 (and 700) are completely different from the Everest versions. The only similarities are the physical construction and the fact that they are wireless. Apart from that, the Elites are active noise-cancelling headphones, and they can be controlled from the My JBL Headphone app, which the "normal" Everests cannot. This permits control of frequency response via an equalizer, and gradual blending in of surrounding noise with the Awareness system, for each ear individually. Also, it permits online updating. The normal Everests feature ShareMe 2.0, where two headphones can be synchronized. The Elite models do not have this feature. Please note that only the Elite 700 is sold in Europe, out of the three models in the Elite series. The 100 and the 300 are sold in the USA. The Everests are all sold everywhere.
Answered by: Bo Harman
Date published: 2017-12-24

Where can I find a firmware update? Suffering very bad audio lag when pairing to my devices with Bluetooth and JBL's support page is totally non descript about how to solve this terrible problem. A very disappointed customer.....

Asked by: arocks652
We would like to work with you directly to help you with your issue. Please submit a case request at https://www.jbl.com/support-contact.html and the Customer Service Team will be more than happy to assist you.
Answered by: Steve S
Date published: 2018-01-24
  • y_2018, m_9, d_20, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_171
  • loc_en_US, sid_everest300, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_jbl