Detailshttp://www.jbl.com/car-subwoofers/GTO1014D.html 1400-watt, 10" die-cast, dual-voice-coil subwoofer
Why Buy Direct from JBL.com?
Get the lows bumping big with the GTO1014D, a subwoofer design triumph from the JBL® Grand Touring® Series family. It delivers deep, solid, tight bass and serious power that can only come from the leader in live performance sound. GTO subwoofers include die-cast aluminum baskets, polypropylene cones, rubber surrounds and a unique tinsel wire protector. The GTO1014D has dual 4-Ohm voice coils and 1400 watts of peak power handling so it can handle whatever you can dish out. Sure, it’s your car. But we think we know what your standards are no matter where you are and where you go – and they’re ours too.
What's in the box?
- (1) GTO1014D 10”die-cast dual-voice-coil subwoofer
- (1) Owner's Manual
Shop all Car Subwoofers
Not finding what you're looking for?Shop all Car Subwoofers
Product Specs, Manuals, Compatibility & Features
Manuals & Downloads
The latest owner's manuals, quick start guides, and documents.
- Grand Touring
- Peak Power
- Power Handling (RMS)
- Frequency Response
- Nominal Impedance
- 2 or 8 ohms
- (2.83V/1m) 91dB
- Power Handling (Peak)
- Voice Inductance
- @ 1kHz (Levc – mH) 1.2
- Motor Force Factor
- (Bl – Tm) 10.62
- Total Q
- (Qts) 0.44
- Compliance Volume
- (Vas – ft3 / l) 1.07/30.17
- Free-Air Resonance
- (Fs – Hz) 29.7
- Mechanical Q
- (Qms) 9.5
- Magnetic Gap Height
- (Hag – in/mm) 0.31
- Suspension Compliance
- (Cms – ?m/N) 193
- Low-Frequency Transducer
- 10" (254mm) Polypropylene cone
- Driver Radiating Area
- (Sd – in2/cm2) 51.20/330
- Voice Coil
- 2" (51mm) diameter
- Electrical Q
- (Qes) 0.46
- Maximum Excursion
- (Xmax –in/mm) 0.57/14.5
- Voice Coil DC Resistance
- (Hvc – in/mm) (Revc – ohms) 1.88
- Voice Coil Height
- (Hvc – in/mm) 1.45/37
Big bass with Polypropylene woofer cone
Road noise can destroy realistic audio that always requires true low frequencies. Polypropylene delivers rigidity, with good internal damping, and complete weather-resistance. You get an impossible-to-miss increase in thumping bass.
A JBL-proprietary frame, broad installation options
The proprietary die-cast frame design allows maximum cone excursion while reducing overall mounting depth. The die-cast structure maintains precise alignment tolerances over years of blasting music and rough roads. You get all the bass you’ve paid for.
Exceptional venting for increased power handling
Woofer motor structures heat up during use, causing distortion, or power compression that reduces music’s dynamic range, robbing the sound of realism. JBL uses vented motor structures and polepieces that get rid of more heat to deliver more serious bang.
Outstanding audio output, low distortion
With 350 watts RMS and 1400 watts of peak power handling, the GTO1014D changes the experience of listening to your favorite music in your car. Dual voice-coils increase system design options by allowing 2-ohm or 8-ohm operation. And a progressive spider gives better control for lower distortion at excursion limits.
Designed for sealed, vented, and bandpass enclosures
Different people have different opinions on what makes for the best subwoofer box. Have it your way with the GTO1014D, it can handle anything.
Warranty 1 Year Warranty
Products purchased online or from an authorized local retailer and under warranty may qualify for an exchange with a valid receipt.
Purchases made from an unauthorized dealer will not be elibible for exchange.
No Online Dealer's available for this product
Find a Store Near You
The Store Locator is designed to help you find the closest store near you.
Click a store in the list or on the map to view details.