Plus One® Technology
Plus One carbon-injected cones provide more overall speaker-cone area than other cones in its class.
What's in the box?
- (2) P662S 6-1/2” Shallow-mount two-way loudspeakers
- (2) Speaker clip
- (8) Screws
- (1) Owner's Manual
Shop all Car Speakers
Not finding what you're looking for?Shop all Car Speakers
Product Specs, Manuals, Compatibility & Features
Manuals & Downloads
The latest owner's manuals, quick start guides, and documents.
- Power Series
- (2.83V@1m) 93dB
- Power Handling (Peak)
- Frequency Response
- Nominal Impedance
- 2 ohms
- Power Handling (RMS)
- Ultra High Frequency Transducer
- High-bandwidth, edge-driven, textile-dome tweeter
Plus One® woofer cone
The Plus One® Honeycomb-Laminate™ woofer cone is exceptionally stiff and lightweight, with up to 25 percent more active surface area than a standard one of the same size. With a long-excursion surround, it boosts bass output and efficiency by 2 to 3 decibels compared with others.
Home theater-quality tweeter
It’s not the miniatures that most others use, but a high-bandwidth, edge-driven textile-dome tweeter like those found in very high-end home audio loudspeakers. Crank it up. You get less distortion even at high volumes and superior integration with the woofer.
Mount and listen however you like
The JBL® P662s has tweeter-level control. Use the simple switch to set the tweeter output level to match your personal listening preference, or different mounting locations.
Great audio output and frequency response
You’ll have 55 watts RMS and 165 watts peak power handing. And push them to the limit. You’ll hear true JBL® sound, with nothing under- or over-emphasized. The P662s has a frequency response of 45Hz to 23kHz.
Higher SPL than ever
In addition to better sound quality, the new, proprietary, JBL-patented woofer design offers far higher SPL (sound pressure level) and better suspension symmetry for lower distortion than the previous generation.
Higher efficiency than ever
These speakers make the best use of any amplifier by providing an optimum 2-ohm load. They use a lower-impedance voice coil than a typical speaker to extract the most power and performance possible from all amplifiers engineered to drive loads of 4 ohms or less.
Outboard crossover networks
Outboard crossovers are integrated into a harness connected to each speaker for easy installation. Oversized Direct-Connect terminals ensure perfect connectivity for bare speaker wires.
Warranty 1 Year Warranty
Products purchased online or from an authorized local retailer and under warranty may qualify for an exchange with a valid receipt.
Purchases made from an unauthorized dealer will not be elibible for exchange.