Item# LEGEND CP100
JBL

Legend CP100

Details

2-DIN, 6.75” Touch screen in-dash receiver


Variations
$399.95399.95 each
Promotions
Product Actions
Add to cart options
Availability:

Coming Soon

Does It Fit My Car?
Highlights

The JBL Legend CP100 in-dash smart phone receiver upgrades your 2-DIN system to a 6.75” touch screen connected car experience. The JBL Legend CP100 is Bluetooth enabled, has a rear camera input, is steering wheel interface ready and provides turn-by-turn navigation through Android Auto and Apple CarPlay. Making calls, sending messages, finding directions, playing music and navigating all become easier, safer and more intuitive using the JBL Legend CP100. You get traditional AM/FM and smart phone connectivity in one package with a simple, clean interface. Drive Safe. Drive Smart. Drive Connected.

What's in the box?

  • 6.75” capacitive touch screen AM/FM smart phone receiver
  • Microphone
  • Wiring harness
  • Quick start guide
  • Warrant card

The CP-100 is compatible with both Android and IOS based smartphones. Music Management, Calling, Contacts and Messaging can all be controlled from the CP100

Conenct your CP-100 to a variety of backup cameras to increase visiblity when in reverse.

You can connect your smartphone to the CP-100 via bluetooth allow you to stream music and make and take calls. (Note: When using Apple Car Play and Android Auto, a USB connection is required)

Allows for easy and safe operating of the system while driving

The Legend CP-100 is lightning fast thanks to the on-board IMX6 processor. Access to your music, contacts and infomration is accessible instantly, No waiting!

Maintain use of your steeering wheel contols with the CP-100 and third party steering wheel interfaces such as those offered by Maestro

The CP-100 has a 4 x 20 watt amplifier built in, allow you to drive speakers without the purchase of an additional amplifier.

Conecting to outboard amplifiers. No problem. The CP-100 has two sets of RCA preamp out jacks allow you to connect to your favorite amplifier or amplifiers.

Display Screen Size
6.75"
LCD Type
TFT active matrix
Pixels
1,152,000 (800 x 480 x 3 (RGB))
Illumination
LED
Power Output
20W RMS x4 (Primary amplifier ratings per CEA-2006 standard)
Signal to Noise Ratio
107 dBa (reference: 1W into 4 ohms)
Power Requirement
14.4V DC 11 – 16 V allowable
Operating Temperature
-20°C to 85°C (-4°F to 185°F)
Height
3.94” (100mm)
Width
7" (178mm)
Depth
5.6" (142mm)
Weight
3.3lbs (1.5kg)
Tuning
530 – 1,170 kHz
Sensitivity
25 uV/20 dB
Frequency Range
87.7 – 107.9 MHz
Sensitivity
11 dBf (0.8 uV/75 ohms)
Signal-To-Noise Ratio
60 dB
USB Standard
USB 1.1/2.0
Max Current Supply
1.0 A USB Class: MSC (Mass Storage Class)
File System
FAT 16/32, NTFS File
Version
Bluetooth 4.0
Output Power
+4 dBm Max. (Power class 2)

5 Year Electronics

Products purchased online or from an authorized local retailer and under warranty may qualify for an exchange with a valid receipt.

Purchases made from an unauthorized dealer will not be elibible for exchange.

Request an Exchange

Call us: 1.800.336.4525

  • Sales and pre-sale assistance
  • Technical help
  • Parts and accessories
Sharing
Legend CP100 is rated 4.25 out of 5 by 4.
Rated 5 out of 5 by from tired of waiting Looks good on paper but been waiting for this to be shipped since March. They just keep pushing it back every month. Hope y'all got patience but couldn't take it anymore and just bought the Alpine ALX-007
Date published: 2016-06-05
Rated 5 out of 5 by from I love JBL I am a professional Installer at Best Buy. I always promote the JBL products because they sound great. I'm stoked that JBL has made the leap into the Indash unit. This is very bold and I hope it does well. $400 for an indash with carplay and android auto is an absolutely amazing deal. I cant wait until I get a chance to install this unit. I'm definitely buying one of these!!! To customers that don't know if this radio will fit their vehicle: This is a double din radio. It is a standard size. Most newer vehicles will accept this radio. If you have any questions, call best buy and we will be happy to tell you if it will fit in your vehicle. To JBL: Keep up the great work!!!
Date published: 2016-02-22
Rated 4 out of 5 by from Look nice, however now we are up to July? I really wanted to purchase this device. I like the look and the price and JBL traditionally makes great products, however the ever increasing delays with this unit make it impossible for me to purchase it. We went from March, to May and now it is showing July. Sorry guys I have to go elsewhere for my Apple Play compatible receiver. Sorry
Date published: 2016-05-03
Rated 3 out of 5 by from It's certainly a great step forward for after market CarPlay & Android Auto devices. However, the capacitive touch display with 138.2 DPI/PPI native screen resolution in today's mobile environment is hugely disappointing. For most users it won't sit well to view the extensions of their mobile device in lower native resolutions than their hand held ones. As the device display is the most important component of any mobile hardware that acts as an interface of the auto infotainment system. This is where you view colors & read text of control buttons and contents. I hope JBL would soon upgrade the poor native screen resolution & color gamut. I myself can't wait to get some hands on experience as soon the current one becomes available.
Date published: 2016-03-19
  • 2016-07-24T08:57CST
  • bvseo_cps, prod_bvrr, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_cp100legend, PRD, sort_positive
  • clientName_JBL

Can I hook up directly to my JBL synthesis speaker in my 2006 Toyota 4Runner without harness?

Asked by: Hoon
As long as your factory premium systems with external amp has two preouts, the LEGEND CP100 can be hooked up directly. However, mounting the LEGEND CP100 varies from vehicle to vehicle. You’ll need to purchase or fabricate a mounting bracket to secure the receiver in the dash of your vehicle. You’ll also need to purchase a vehicle-specific wiring harness, or splice the receiver’s wires directly to your vehicle’s power and signal wires.
Answered by: Joe G at Customer Service
Date published: 2016-07-19

Will there be any additional inputs on the back (i.e. HDMI or AV)? I didn't see any in the user's manual but since there's such a large delay, I figured it may not be updated.

Asked by: CrayShawn
Unfortunately, no. There would be no additional inputs added to the CP100.
Answered by: Amir at Customer Service
Date published: 2016-07-18

Where does the USB for the Lightning/USB cable end up? Do you have to rout it through your car from the back of the device?

Asked by: jwbrobst
You can use an extension USB cable to hook it up at the back of the LEGEND CP100 and place it anywhere in the dash of your vehicle. That way, you can always plug in your iDevice without reaching the USB input at the back of the LEGEND CP100.
Answered by: Joe G at Customer Service
Date published: 2016-07-07

I love this radio for my Avalon , but i see the video and I need to know if when I play music the only I can see it's the name of the song and the artist ? . I will love to se the cover on my screen too. 

Asked by: Spartan
When playing music through the LEGEND CP 100 the visuals on the screen would rely on the source. If the stored audio file has an album cover included then, it would be visible on the screen.However, if it's not included only the name of the song and the artist would appear.
Answered by: Joe G at Customer Service
Date published: 2016-07-06

what exact product would you recommend to connect this to your steering wheel controls?

Asked by: Josher95
The CP100 fits most newer cars and is also compatible with most steering wheel commands. The CP100 Maintains use of your steering wheel controls with third party steering wheel interfaces such as those offered by Maestro. For full compatibility check, I suggest that you get in touch with your dealer and determine compatibility with your vehicle.
Answered by: Joe G at Customer Service
Date published: 2016-07-06

I have a 2011 sonata limited with factory installed dimension audio with amplifier, two tweeters, four door speakers and a subwoofer. Will the CP100 be a direct plug and play installation with my audio setup ?

Asked by: Muztheem
Yes, the two preouts should be enough to connect the LEGEND CP100 to cars with factory premium systems with external amplifiers. However, mounting the LEGEND CP100 varies from vehicle to vehicle. You’ll need to purchase or fabricate a mounting bracket to secure the receiver in the dash of your vehicle. You’ll also need to purchase a vehicle-specific wiring harness, or splice the receiver’s wires directly to your vehicle’s power and signal wires.
Answered by: Joe G at Customer Service
Date published: 2016-07-06

What is the est arrival date for this item (JBL Legend CP100)

Asked by: jrperiod
I cancelled my pre-order with Crutchfield and ordered a Kenwood yesterday after I found out that its been postponed indefinitely. Too bad because I was really looking forward to this unit. My Kenwood should deliver on Friday. 
Answered by: Too bad
Date published: 2016-07-06

Does this come with everything I need to install in a 2008 Camry with steering wheel controls and JBL system?

Asked by: ron77reed
The CP100 fits most newer cars and is also compatible with most steering wheel commands. The CP100 Maintains use of your steering wheel controls with third party steering wheel interfaces such as those offered by Maestro. For full compatibility check, i suggest that you get in touch with your dealer and determine compatibility with your vehicle.
Answered by: Amir at Customer Service
Date published: 2016-06-25
  • 2016-07-24T09:23CST
  • bvseo_cps, prod_bvqa, vn_cps_3.3.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_234
  • loc_en_US, sid_cp100legend, PRD, sort_recentAnswersFirst
  • clientName_JBL

Store Locator

No Online Dealer's available for this product

Find a Store Near You

The Store Locator is designed to help you find the closest store near you.

Click a store in the list or on the map to view details.